Need help? email us info@rodgersfarm.com

Welcome to our Online Store!

Rox Speed FX Products. 23 Result(s) Available


0  1  2  

Pivoting Handlebar Risers for 7/8"" or 1 1/8"" Bars

$ 97.00
Rox Speed FX Pivoting Handlebar Risers for 7/8"" or 1 1/8"" Bars These Rox Pivoting Risers allow you to clamp a stock 7/8"" diameter handlebar or you can remove the reducers and then clamp in a 1 1/8"" aluminum ""fatbar"". If you are thinking of going to a fatbar after you bend your stock set, this is the riser to go with. Always check and confirm that your bike has adequate cable and brake line length before installing any handlebar risers.

View Product Motorcycle Superstore Rox Speed Fx


Rox Speed FX 4"" Chrome Pivoting Handlebar Risers

$ 235.99
Rox Speed FX unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser Provides an incredible amount of bar positions for you to find the right height and pull-back for your riding position and stature Incredibly universal with their 2-piece design, clamped into virtually any 1"" diameter clamps and then re-clamping the bar directly above that, on its original clamping area Machined from 6061-T6 billet aluminum, made for 1"" diameter handlebars Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes 4"" center to center height

View Product J&P Cycles Rox Speed Fx


Rox Speed FX 2"" Chrome Pivoting Handlebar Risers

$ 180.99
Rox unique patented riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser Provides an incredible amount of bar positions for you to find the right height and pull-back for your riding position and stature Incredibly universal with their 2-piece design, clamped into virtually any 1"" diameter clamps and then reclamping the bar directly above that, on its original clamping area Machined from 6061-T6 billet aluminum, made for 1"" diameter handlebars Universal 2-piece design attaches to nearly any bar or clamping area with a 1"" diameter Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes 2"" center to center height

View Product J&P Cycles Rox Speed Fx


Rox Speed FX Pivot Handlebar Riser

$ 96.99
These universal risers work great on ATVs, dirt bikes, and motorcycles with a 7/8"" bar. These will also work on snowmobiles that have flat plate steering stems. These risers allow you to pivot your bars forward and backward for your ultimate comfort. They will clamp into 7/8"" stems and clamp stock 7/8"" handlebars. Patented by the US Patent and Trademark Office under US Patent #6,920,806.Two inch pivoting handlebar riser for 7/8"" bars.Patented pivoting riser works on any machine with 7/8"" bars.Dual rotation points allow rider to select optimum riding position for comfort and control.10 minute install on most machines.Made in the U.S.A.Sold in pairs.Note: Double-check length of cables and brake lines for proper fit; extended length cables or brake lines may be required for proper operation.

View Product MotoSport Rox Speed Fx


Rox Speed FX Deluxe Pivot Handlebar Riser

$ 119.99
Machined from 6061-T6 billet aluminum, made for 7/8"" diameter handlebars.Universal (2-piece) design attaches to nearly any bar or clamping area with a 7/8"" diameter.Dual rotation points allow rider to select optimum riding position for comfort and control.NOTE: Double-check length of cables and brake lines for proper fit. Extended length cables or brake lines may be required for proper operation.Sold in pairs.Made in the U.S.A.

View Product MotoSport Rox Speed Fx


Elite Series Anti-Vibration Pivot Risers

$ 163.00
Rox Speed FX Elite Series Anti-Vibration Pivot Risers Independent left and right risers adapt to any handlebar clamp width and therefore virtually any machine with 7/8"" bar clamps Anti-Vibe design reduces vibration in bars Provides a slight shock damping effect to help protect rider and machine Dual rotation points allow rider to select optimum riding position for comfort and control Rox Elite Series risers allow you to clamp 7/8"" or 11/8"" taper bars Engineered and tested for maximum strength and durability CNC-machined from billet 6061 T-6 aluminum anodized gold **Notes: Confirm you have sufficient clearance between Anti-Vibe bolt and cowl when turned full left or right; bolt extends below OE saddle clamp 7/8"" Longer cables may be required when installing handlebar risers Rise Bottom Top 2.00"" 7/8"" 7/8-1-1/8"" 2.25"" 1-1/8"" 1-1/8""

View Product Motorcycle Superstore Rox Speed Fx


Low Pro Pivoting Handlebar Risers

$ 95.00
ROX Speed FX Low Pro Pivoting Handlebar Risers Super low profile 1-3/4"" center-to-center riser designed to fit BMW F800GS or KTM 990 Adventure with stock lines and cables; also fits many other street, off-road, and dual sport models with a 1-1/8"" stem clamp and a 11/8"" handlebar. Handlebar clamps and can be pivoted to desired fore and aft location to achieve ideal riding position Features an 8mm tap hole in the end of the posts to mount accessories Engineered and tested for maximum strength and durability CNC-machined from billet 6061 T6 aluminum, then clear anodized **Note: For the BMW F800GS the front brake perch should be moved inboard on the handlebar 3/8"" to relieve even more brake line and to insure proper function. When installing these risers pivoted up and back, it is also recommended to spin the OEM caps 180 degrees to make the final tightening bolt the forward bolt. ***Note: Will not fit BMW R1200GS. ****Note: Confirm you have sufficient clearance between Anti-Vibe bolt and cowl when turned full left or right; bolt extends below OE saddle clamp 7/8"" Longer cables may be required when installing handlebar risers

View Product Motorcycle Superstore Rox Speed Fx


Pivoting Handlebar Risers

$ 235.95
Rox Speed FX Pivoting Handlebar Risers Rox unique riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser. This provides an incredible amount of bar position options for you to find the right height and pull-back for your riding position and stature. Keep in mind these risers work great if you are interested in changing to a bar that has a different sweep but happens to be lower; you can now gain back the height plus add fore and aft position selection. If you are experiencing discomfort after a few hours of riding give these Rox cruiser risers closer consideration. We trust this product will bring you a new and expected level of comfort. Their goal is to provide you not only with an attractive, eye catching accessory but as importantly a means of acquiring the proper ergonomic position so you can return your attention back to the pleasures and sights of the open road. Features: Machined from 6061-T6 billet aluminum made for 1"" diameter handlebars Available in chrome or anodized black Universal (2-piece) design attaches to nearly any bar or clamping area with a 1"" diameter Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes Sold in pairs Made in the U.S.A. Rise height is measured from center to center of the riser 2, 3, and 4 inch rise heights available

View Product Motorcycle Superstore Rox Speed Fx


Pivoting Handlebar 2"" Risers

$ 97.00
Rox Speed FX Pivoting Handlebar 2"" Risers Rox unique riser design allows you to pivot the riser in the original clamps and pivot the bar orientation in the top clamps of the riser. This provides an incredible amount of bar position options for you to find the right height and pull-back for your riding position and stature. Keep in mind these risers work great if you are interested in changing to a bar that has a different sweep but happens to be lower; you can now gain back the height plus add fore and aft position selection. If you are experiencing discomfort after a few hours of riding give these Rox cruiser risers closer consideration. We trust this product will bring you a new and expected level of comfort. Their goal is to provide you not only with an attractive, eye catching accessory but as importantly a means of acquiring the proper ergonomic position so you can return your attention back to the pleasures and sights of the open road or trail. Features: 1-1/8"" mount size and handlebar size Machined from 6061-T6 billet aluminum Chrome risers come standard with chrome bolt head buttons Re-routing of stock lines and cables or longer lines and cables may be necessary on certain bikes Sold in pairs Made in the U.S.A

View Product Motorcycle Superstore Rox Speed Fx


0  1  2